Idiomas disponibles
Idiomas disponibles
USING THE DISHWASHER
SELECT OPTIONS
5
The light by the selected pad will be lit to indicate which Option has been selected.
Light
Press to turn the tub light on or off.
Delay
Delays the start of a wash cycle up to 8 to 12 hours depending on model. Press Delay, to select the
number of hours, then press Start one time and close door to begin countdown. The cycle will start
once allotted time has expired.
Sanitize
This option raises the water temperature in the final rinse to sanitize your dishware but may increase
cycle time by 60 minutes. The cycle length will vary depending on the temperature of your inlet water.
NOTE: This option is monitored for sanitization requirements. If the cycle is interrupted during or
after the main wash portion or if the incoming water temperature is so low that adequate water
heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the Sanitized
light will not illuminate at the end of the cycle. Utilizing this option will modify the cycle to meet the
requirements of Section 6, of the NSF 184 Standard for soil removal and sanitization efficacy.
NOTE: Certified residential dishwashers are not intended for licensed food establishments.
Zones
Selecting either the Top or Bottom Zones will target dishwashing of just one rack. This will shorten the
cycle time and conserve energy. This option should be used when dishes are placed in only one rack.
Temp
This option increases the temperature to help clean heavily soiled dishes and will increase the cycle
time by 20 to 50 minutes. Option may be turned On or Off during the wash cycle. This option will also
improve dry performance on the Medium cycle.
Dry Off
Shuts off the drying option. Dishes air dry naturally and energy is saved. Open the dishwasher door to
speed drying.
Dry Normal
Turns on the option for faster drying. This option may add up to 64 minutes to the cycle time. On
models with the hidden heater feature, this option boosts the temperature of the dishwasher during
the final rinse portion of the cycle then utilizes a fan to circulate air to dry the dishes. This very efficient
fan may run for an additional 90 minutes after the cycle is complete to maximize drying performance.
Fan operation will end if the door is opened during this 90 minute period.
Dry Extra
This option can be selected by pressing the Dry pad twice to illuminate the Extra light. It will add
additional time to your drying option, further enhancing the dishwasher's performance for difficult to
dry items.
START DISHWASHER
6
Start
Press the Start pad and close the door within 4 seconds to start the cycle or begin the Delay
countdown. The wash cycle will begin shortly after closing the door. The display will turn off if the door
remains open for two minutes. To activate the display, close and open the door or press any pad.
Interrupt
To interrupt or pause a cycle, slowly open the door. Opening the door will cause the wash cycle to
or Pause
pause. The dishwasher will beep every minute to remind you to close the door. To restart or resume the
cycle, press Start, and close the door within 4 seconds.
Cancel
To cancel a wash cycle, press and hold the Start pad for 3 seconds and close door.
The dishwasher will drain, emit a beep sound, and the wash cycle light will turn off.
Cycle Status
The indicator light on the door front will change color to indicate the wash status. During the wash
cycle, the indicator light will be blue. When the wash cycle is complete, the light will change to white.
6
49-4000207 Rev 2
