Bosch Professional GIC 12V-5-27 C Manual Original página 34

34 | English
Data transfer via the USB Type-C® interface
Switch on the inspection camera to transfer data via the USB Type-C® interface. Open
the flap for the USB Type-C® port (17). Connect the USB Type-C® port to your PC via the
USB Type-C® cable (19).
Open the file browser on your PC and select the drive for transferring the files. The name
of the drive is as follows:
– If no micro-SD card is inserted into the inspection camera: Bosch_GIC
– If an unnamed micro-SD card is inserted into the inspection camera: Standard name
of the USB drive
– If a named micro-SD card is inserted into the inspection camera: Name of the micro-
SD card
The saved files can be copied from the internal memory or the micro-SD card of the in-
spection camera, moved to your PC or deleted.
As soon as you have completed the required operation, disconnect the drive following
the standard procedure.
Note: Always disconnect the drive from the operating system of the PC first (eject drive),
as failure to do so may damage the internal memory of the inspection camera.
Remove the USB Type-C® cable (the inspection camera will switch off automatically).
Close the upper flap (16) to protect against dust or splashes.
Note: Only use the USB Type-C® interface to connect the inspection camera to a PC. The
inspection camera may be damaged if connected to other devices.
Note: The USB Type-C® interface can only be used for data transfer. Rechargeable bat-
teries or other devices cannot be charged by this interface.
Working Advice
Check the environment that you want to inspect, paying particular attention to obstacles
or hazardous areas.
Bend the camera cable (1) so that the camera head can be easily introduced into the en-
vironment to be inspected. Carefully introduce the camera cable.
Adjust the brightness of the camera illumination light (3) so that the image is easily re-
cognisable. When photographing highly reflective objects, for example, you can achieve
better results in lower light or using black and white contrast setting.
If objects to be inspected look blurred, then reduce or increase the distance between
camera head (2) and object.
1 609 92A 89L | (17.03.2023) Bosch Power Tools