Before Use; Refrigerator Use; Power On/Off Switch - KitchenAid KSSC36FKB01 Manual De Uso Y Cuidado

Refrigeradores empotrados, con puertas laterales
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

BEFORE USE

Removing packaging materials
Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see the "Refrigerator Safety" section.
Cleaning before use
After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions
in the "Refrigerator Care" section.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when re-
moving them to avoid impact from dropping.
4

REFRIGERATOR USE

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion,
or fire.

Power On/Off Switch

If you need to turn the power to your refrigerator ON or OFF, you
must remove the top grille assembly to access the On/Off switch.
Turn the power to the refrigerator OFF when cleaning or changing
light bulbs.
Panel Models (on some models)
To remove top grille:
1. Grasp both ends of the top grille assembly.
2. Push the top grille assembly straight up, then pull straight
out. Lay the assembly on a soft surface.
2
1. Top grille
2. Cabinet side trims
1
2
Tabla de contenido
loading

Este manual también es adecuado para:

Kssc36fkb02Kssc36fks01Kssc36fks02

Tabla de contenido