Royal Catering RCMT-351W Manual De Instrucciones página 13

Ocultar thumbs Ver también para RCMT-351W:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
b)
The device is not intended to be used by persons (including children) with reduced mental, sensory, or
intellectual functions or persons who lack experience and/or knowledge unless they are supervised or
have been instructed by a person responsible for their safety on how to operate the device.
c)
The unit may be operated by persons who are physically fit, capable of operating it, and appropriately
trained, and who have read this instruction manual and have been trained in occupational safety and
health.
d)
Use caution and common sense when operating this unit. A moment's inattention during operation may
result in serious personal injury.
e)
To prevent accidental start-up, make sure the switch is in the off position before connecting to a power
source.
f)
Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts. Loose
clothing, jewelry, or long hair can be caught in moving parts.
g)
The product is not a toy. Children should be watched to ensure that they do not play with the product.
h)
Do not place your hands or any objects inside the running device!
2.4.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the application. A correctly selected product
will do a better and safer job for which it was designed.
b)
Do not use the device if the ON/OFF switch does not function properly (does not turn on and off). Units
that cannot be controlled by the switch are unsafe, cannot operate, and must be repaired.
c)
Disconnect the device from the power supply before adjusting, cleaning, or servicing. This precaution
reduces the risk of accidental start-up.
d)
Keep unused product out of the reach of children and anyone unfamiliar with the device or this manual.
Products are dangerous when used by inexperienced users.
e)
Keep the product in good working order. Check before each use for general damage or damage to
moving parts (cracks in parts and components or any other condition that may affect the safe operation
of the device). If damaged, return the device for repair before use.
f)
Repairs and maintenance should be carried out by qualified personnel using only original spare parts.
This will ensure the safety of use.
g)
To ensure the designed operational integrity of the device, do not remove factory-installed covers or
loosen screws.
h)
When transporting or moving the device from storage to the place of use, observe the health and safety
rules for manual handling applicable in the country where the device is used.
i)
Avoid situations in which the device stops under heavy loads during operation. This can cause
overheating of the drive elements and consequent damage to the equipment.
j)
Do not touch any moving parts or accessories unless the device is unplugged.
k)
Do not move, shift, or rotate the device while in operation.
l)
Do not leave the device switched on unattended.
m) Clean the device regularly to prevent permanent dirt build-up.
n)
The product is not a toy. Cleaning and maintenance must not be performed by children without adult
supervision.
o)
Do not tamper with the device to alter its performance or design.
p)
Keep the unit away from sources of fire and heat.
q)
Do not block the ventilation openings of the unit!
r)
The device can only be used for grinding meat.
s)
Never grind:
- hard foods such as grains, nuts or bones with the appliance.
• food with hard fibers, such as ginger.
• frozen food,
• items not intended for consumption.
t)
Never push food through the feed channel with your hand or fingers. Always use a pusher.
u)
The device runs continuously for 30 minutes, after which it should be turned off for 15 minutes to cool
down.
loading