Dorman SWS96285RD Instrucciones De Instalación página 21

SWS96285RD
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service
manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all
cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on
specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
Part
Steering Damper Bushing @ Drag Link
Steering Damper Post @ Drag Link
Stabilizer Link Bracket @ Sway Bar
Stabilizer Link Bushing @ Sway Bar
Stabilizer Link Bullet at Axle
Stabilizer Link Jam Nuts
Stabilizer Link Disconnect Post @ Frame
• Regularly grease all joints with a high quality NLGI #2 chassis grease every 3,000 miles.
• Vehicle should never be operated with stabilizer links disconnected on public roads or speeds
over 15 MPH.
• If wobble continues after installation it is likely there are additional vehicle components that have worn.
Check the following components and replace if necessary.
o Steering box and Pitman arm
o Rear panhard rod
o Front and rear control arm bushings
o Tires (check for balance and wear)
Please call our Technical Support team for assistance
from our team of certified automotive experts.
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto
technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in
property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National
Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492
©2022 No reproduction in whole or in part without prior written approval.
INSTALLATION INSTRUCTIONS:
Minimum Torque Specification
(Ft – Lbs)
55
55
40
40
65
20
15
Still need help?
1-866-933-2911
Disclaimer:
STEERING WOBBLE KIT
Thread Size
M12 x 1.25
M12 x 1.25
M10 x 1.5
M10 x 1.25
1/2 - 20
M16 x 1.5
M8 x 1.25
SWS96285RD_Instructions
21