Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SWS96285RD
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specific service procedures for this part. If you do not have a service
manual or lack the skill to install this part, it is recommended that you seek the services of a qualified technician. Pay special attention to all
cautions and warnings included in the shop manual. Read and follow all instructions carefully. This product is only designed to function properly on
specific vehicle applications. Please verify that the vehicle requirements match the product specifications and application notes for this part.
After Installation
• Vehicle must be aligned after kit installation.
Description
Preferred
Range
Max RT/LT Difference
Preferred
Range
*Vehicles with lifts and/or over-sized tires should consult their lift kit manufacturer for recommended caster angle.
• Check the torque specifications of all fasteners without a cotter pin after the first 50 miles of operation
and again after 500 miles. Refer to chart for installation torque specifications:
Part
Upper Ball Joint
Lower Ball Joint
Drag Link @ Pitman Arm
Drag Link @ Passenger Knuckle
Drag Link Adjustment Sleeve Collar
Tie Rod @ Drag Link
Tie Rod @ Driver Knuckle
Tie Rod Adjustment Sleeve Collar
Track bar Bracket @ Frame M12
Track Bar Bracket @ Frame M10
Track Bar Bushing @ Frame
Track Bar Bushing @ Axle
Track Bar Adjusting Sleeve
Steering Damper Bushing @ Axle
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto
technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in
property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National
Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492
©2022 No reproduction in whole or in part without prior written approval.
INSTALLATION INSTRUCTIONS:
Specifications
Caster
+7.0°
+/- 1.0°
0.65°
Rear Specification
N/A
N/A
Thrust Angle 0° +/- 0.25°
Minimum Torque Specification
(Ft – Lbs)
75
80
65
55
35
55
55
20
65
55
55
55
35
55
Disclaimer:
STEERING WOBBLE KIT
Specification
Camber
(fixed angle)
-0.25°
+/- 0.63°
+/- 1.0°
Rear Camber
-0.25°
0° to -0.50°
Total Toe-In
+0.15°
(each front wheel)
+/- 0.06°
0.06°
Total Toe-In
+0.25°
0° to 0.5°
Thread Size
M14 x 1.5
5/8 - 18
1/2 - 20
1/2 - 20
M10 x 1.25
1/2 - 20
1/2 - 20
M8 x 1.25
M12 x 1.5
M10 x 1.5
M12 x 1.5
M10 x 1.25
M12 x 1.25
M12 x 1.75
SWS96285RD_Instructions
20
Tabla de contenido
