Idiomas disponibles
Idiomas disponibles
Problem
Possible cause
The iron is not hot
enough.
Water
You have not closed
droplets drip
the cap of the filling
onto the
opening properly.
fabric during
ironing.
You have put an
additive in the
water tank.
The set
temperature is
too low for steam
ironing.
You have used
the steam boost
function at a
temperature setting
below 3.
Water drips
You have put the
from the
iron in horizontal
soleplate
position with water
after the
still left in the water
iron has
tank.
cooled
down or has
been stored.
All manuals and user guides at all-guidesbox.com
Solution
Set an ironing temperature at
which the steam boost function
can be used ( 3 to MAX). Put
the iron on its heel and wait until
the temperature light has gone
out before you use the steam
boost function.
Press the cap until you hear a
click.
Rinse the water tank and do not
put any additive in the water tank.
Set a temperature of or 2
higher.
Set the temperature dial to a
setting between 3 and MAX.
Empty the water tank.
ENGLISH
21
