Idiomas disponibles
Idiomas disponibles
What is included in the box
Supply of this TV includes following parts:
•
1x TV
•
1x Remote control
•
2x AAA batteries
•
1x Warranty card
Attaching the Stand
Please follow the instructions in Technical leaflet, located in the
accessories bag.
Getting started - initial set up
1.
Insert the batteries supplied into the Remote control.
2.
Using the RF cable supplied, connect the TV to the TV Aerial wall
socket.
3.
Connect the power cable to the Electrical outlet and switch the TV on
by using the standby button on the TV.
4.
After turning the TV on, you will be welcomed by the First Time
Installation menu.
If it does not appear, on the remote control, please press [MENU] then
8-8-8-8 and the menu will appear.
If you wish to make changes to any of the default settings, use the
scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]
button.
5.
Please set desired settings in FIRST TIME INSTALLATION screen.
DVB Antenna - You can choose between Terrestrial (DVB-T), Cable
(DVB-C) or Satellite (DVB-S)*.
Language - Set the TV Menu language.
Country - Set the desired country.
Tunning Mode - Choose if you want to tune only Digital (DTV)
Analogue (ATV) or both Digital and Analogue (DTV + ATV)
Environment - Select the location of TV.
For home use, please select Home Mode.
For shop demonstration mode, set Store Mode.
Sorting by LCN - Set LCN to ON if you want to arrange channels by
provider preferences (only applies to DVB-T and DVB-C channels).
6.
Press [ENTER] button to start the tuning process.
7.
Optional channel presets DVB-C:
Keep all default settings as recommended.
If DVB-C channels are not found, contact your network provider for the
valid "Network ID". Then perform a new search. Press the [MENU], select
"Network ID" and enter the network ID.
8.
Optional channel presets DVB-S2*: Select "Satellite" in the "DVB
Antenna" in the menu for the optional channel presets. Here you can
choose between the various satellites. Since selection completed, then
the channel list of the exact satellite will be available to be imported
into your TV system.
Confirm with [ENTER] button on the remote control, to start
scanning.
TIP: If you are missing channels, the reason for this is likely to be signal
strength, you should consider connecting signal booster and re-tuning the TV.
* - Available only for TVs with DVB-S tuner
•
1x User guide
•
1x TV stand installation packet
•
1x Technical leaflet
Remote control
Refer to remote control picture on the second page of this user
manual.
1.
STANDBY – Switch on TV when in standby or vice versa.
2.
MUTE – Mute the sound or vice versa.
3.
0 – 9 – to select a TV channel directly.
4.
TV/RADIO – Switch to Digital and switch between TV and radio in
Digital mode.
5.
FAV – To display favourites menu.
VOL +/- – To increase / decrease the sound level.
6.
7.
RECLIST – No function
8.
GUIDE – Opens the 7 Day TV Guide (Digital mode).
CH +/- – To increase or decrease the channel being watched.
9.
10. REC – No function
11. MTS – To change the audio language (if available).
12. ASPECT – To switch the screen between the different picture formats.
13. MENU – To display OSD menu.
14. (▲/▼/◄/►/ ENTER) – Allows you to navigate the on-screen menus
and adjust the system settings to your preference. While watching TV,
press ENTER to show Channel list.
15. SOURCE – To display the input/source menu.
16. EXIT – To exit all menus.
17. DISPLAY – Press to display the source and channel's information
18. COLOUR BUTTONS – Additional teletext and OSD functions
19.
– To play in fast rewind mode.
20. INDEX – Teletext mode - To display the index page
21.
– To play in fast forward mode.
22. TTX – Teletext mode - To enter Teletext
23.
– Push 1x to restart the current chapter/push 2x for previous
chapter
24. SUB.PG – Teletext mode - Switch to the next subpage
25.
– To advance forward to the next chapter
26. REVEAL – Teletext mode - To reveal or hide the hidden words
27.
– To stop the playback
28. HOLD – Teletext mode - Hold current page which is displayed
29.
– To play/pause
30. CANCEL – Press this button in Teletext when searching for a page to
return to TV mode. When the page is found, a notification will appear
on the screen. Press the CANCEL button again to return to Teletext and
view the page.
31. SIZE – Teletext mode - To change the display size in Teletext mode
32. SUBTITLE – To switch the dialogue at the bottom of the screen (on/
off ).
TV buttons*
Vol+ Volume up and menu right
Vol- Volume down and menu left
CH+ Programme/Channel up and menu up
CH- Programme/Channel down and menu down
MENU Displays Menu/OSD
SOURCE Displays the input source menu
STANDBY Standby Power On/Off
* - for TV with buttons
TV Control Stick*
TV control stick is located on the lower left corner of back side of the TV.
You can use it instead of remote control to control most of the functions
of your TV.
While TV is in standby mode:
• short press of control stick - Power On
While watching TV:
EN
