Care Instructions For Miranit-S; Important - Franke AQCT0031 Instrucciones De Montaje Y Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Water connection from the top:
19.1 Close the water volume regulators.
a: closed
b: open
19.2 Trigger the fitting.
19.3 Disconnect the water connections.
19.4 Unscrew the screws on the shower panel.
19.5 Unhook the shower panel.
19.6 Hook the shower panel on hook bar from the side.
Water connection from the rear:
19.7 Unscrew the screw on the shower panel.
19.8 Unhook the shower panel.
19.9 Hook the shower panel on hook bar from the side.
19.10 Close the flow volume regulators (see
19.11 Trigger the valve.
19.12 Disconnect the water connections.

20. Care Instructions for MIRANIT-S

A pH-neutral soap cleaner is all you need for cleaning. Apply them with a soft, clean
cloth, allow them to act for a short time, and then rinse them thoroughly with plenty
of water.
Caution!
!
Do not use the following for cleaning:
• Cleansers with abrasive properties
• Cleaning sponges or cloths with abrasive properties
• Steel wool or other hard objects
• Solvents

Important!

Any surface damage such as small scratches can be reground directly. A repair kit
available for more serious damage. After applying the repair material and allowing it
to dry, use sandpaper 1000 to smooth the surface.
Work step
19.1).
- 11 -
Tabla de contenido
loading

Este manual también es adecuado para:

Aqct0032

Tabla de contenido