Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Technical data
Operating data
Operating pressure (ideal)
Operating pressure (max.)*
Operating pressure (min.)*
Water temperature (ideal)
Water temperature (max.)
Hole Size For Faucet
Certifies this faucet complies with ASME A112.18.1 / CSA B125.1 & NSF 61, NSF 372 and
AB1953. The faucet also complies with water usage requirements of the California
Energy Comission and the US Department of Energy.
INSTALLATION INSTRUCTIONS
1. Remove all contents from the package
and check for completeness.
2. Turn off water supply.
3. Cut a mounting hole 1 3/8"
diameter (35mm) in the desired mounting
surface (if one isn't available).
4. Ensure Base O-ring (2) is in place in the
Faucet Base (1) (fig. 2A).
2A
1
2
5. Insert the Faucet into the hole, Hoses
first (fig. 2B).
ATTENTION: Base-O-Ring (2) should
be sitting between the countertop and
Faucet Base. DO NOT use putty or other
sealant at this location.
NOTES: Solid surface installation: The
countertop mounting surface needs to be
flat and free of debris; otherwise the faucet
may not sit properly and could leak.
Value
60 PSI
4 bar
400 kPa
115 PSI
8 bar
800 kPa
30 PSI
2 bar
200 kPa
140°F
60°C
158°F
70°C
1
3/8
"
35mm
2B
3
4
5
6
– 4 –
Tabla de contenido
