Worx WX718 Manual Original página 10

occur. Investigate and take corrective action to
eliminate the cause of wheel binding.
d) Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed and
carefully reenter the cut. The wheel may bind,
walk up or kickback if the power tool is restarted
in the workpiece.
e) Support panels or any oversized workpiece
to minimize the risk of wheel pinching and
kickback. Large workpieces tend to sag under
their own weight. Supports must be placed under the workpiece near the line of cut and near the
edge of the workpiece on both sides of the wheel.
f) Use extra caution when making a "pocket cut"
into existing walls or other blind areas. The
protruding wheel may cut gas or water pipes,
electrical wiring or objects that can cause
kickback.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
10
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves.
Make sure the tool is unplugged prior
to changing accessories.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
Angle Grinder
2.COMPONENT LIST
1. SPINDLE LOCK BUTTON
2. ON/OFF SWITCH
3. AUXILIARY HANDLE
4. SPANNER
5. INNER FLANGE
6. OUTER FLANGE
7. WHEEL GUARD*
8. DISC*
*Not all the accessories illustrated or described are
included in standard delivery.
3.TECHNICAL DATA
Type WX718 WX718.X WX717 WX717.X(700-749
-designation of machinery, representative of Angle
Grinder)
WX718
WX718.X**
Voltage
Power input 900 W
Rated speed 12000 /min
Disc Size 125 mm
Disc bore
Spindle thread
Protection class
Machine weight 2.17 kg
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
WX717
WX717.X**
220-240V~50/60Hz
750 W
11000 /min
115 mm
22.2 mm
M14
/ll
1.77 kg
EN