Idiomas disponibles
Idiomas disponibles
Gear Description
EN
Proposal
Reminder
Remove all packaging materials, keep them out of children`s reach and dispose
them in an environmentally friendly manner.
Clean the inside and outside of the appliance with water and a mild detergent
before putting any food in it.
After the appliance has been levelled and cleaned, wait for at least 2-5 hours
before connecting it to the power supply. See Section INSTALLATION.
Precool the compartments at high settings before loading with food.
12
Use
The temperature in the refrigerator is adjusted by the temperature controller
and the smaller the power consumption of the refrigerator; The stronger the
the power consumption of the refrigerator.
The "MAX" position of the scale is the lowest temperature gear in the refrigerator.
This position can be used for quick freezing. After the food is completely frozen,
please turn the scale back to the original setting gear
The "OFF" position on the knob is the shutdown position. When this position
is set, the refrigerator will not cool.If the refrigerator needs to be stopped for
a long time, please unplug the power plug.
The common gear of the refrigerator is the "MID" position of the scale turned on.
If the temperature in the box is too high, please increase the scale appropriately.
If the temperature in the box is too low, please reduce the gradient appropriately.
Please select the position of the temperature controller knob scale according to the actual needs.
When the ambient temperature of the refrigerator is high, if the scale number set is large, the ice
may not stop, and the temperature in the cabinet may be too low.
When the ambient temperature of the refrigerator is low, if the scale number is set to be small, the
refrigerator may not be started, resulting in high temperature in the box, which is not conducive to
food storage and preservation
After the temperature is adjusted, it takes a period of time to achieve the temperature balance in
the box. And the length of this period depends on the size of the changed gear, the ambient tem-
perature, the frequency of opening the door, and the amount of food stored in the box
