American Standard Hampton TU2157 Serie Instrucciones De Instalación

Hampton
®
Pressure Balancing
Bath and Shower Trim Kit
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.
RECOMMENDED TOOLS
Plumbers' Putty
or Caulking
ROUGHING-IN DIMENSIONS
• To assure proper positioning in relation to wall.
Note roughing-in dimensions.
FINISHED WALL
5" REF.
(127 mm)
7" (178 mm) REF.
74" (188 cm)
FOR HEAD
CLEARANCE
18" OPTIONAL
(45.7 cm)
5-1/8"
(130 mm)
TOP OF TUB RIM
BOTTOM OF TUB
(111 mm) REF.
(130 mm) REF.
1/2" (12.7 mm) NPT
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2020
INSTALLATION
INSTRUCTIONS
Teflon Tape Flat Blade Screwdriver
1-5/8" TO 3-1/4"
(41 TO 83 mm)
1/2" NPT (13 mm)
OPTIONAL TO FINISHED
FLOOR USUALLY BETWEEN
65'' AND 78'' (165 AND 198 cm)
2-3/4" MAX. (69 mm)
1-3/4" MIN. (45 mm)
7-5/8"
(194 mm)
1" MIN.
(25 mm)
4" (102 mm)
1/2"
REF.
COPPER
4-3/8"
5-1/8"
TU2157XX
TU2127XX
TU2117XX
SERIES
Phillips Screwdriver
1 1
CARTRIDGE INSTALLATION
• Remove PLASTER GUARD (6)
(Keep it installed for thin wall Installation).
• Remove BONNET NUT (1) by unthreading it
Counter clockwise. Remove test CAP (2).
• Remove PROTECTIVE HOUSING (3) from
CARTRIDGE (4). Install with "UP" text on top.
• Reinstall BONNET NUT (1) onto VALVE BODY (5)
and tighten firmly with 12 Nm or 9 lbs/ft.
NOTE: Specified tightening torque
of BONNET NUT (1) is critical to
assure sealing function.
- 1 -
Adjustable Wrench
5
1
3
4
2
Channel Locks
6
M965932 Rev. 1.1 (3/20)