American Standard Patience TU106500 Instrucciones De Instalación
American Standard Patience TU106500 Instrucciones De Instalación

American Standard Patience TU106500 Instrucciones De Instalación

Equilibrio de presión juego de accesorios de baño y ducha con desviador
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Patience
Pressure Balancing
Bath and Shower Trim Kit
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
For use with shower heads rated at 4.9 L/min (1.3 gpm) or higher.
RECOMMENDED TOOLS
Plumbers' Putty
or Caulking
ROUGHING-IN DIMENSIONS
• To assure proper positioning in relation to wall.
Note roughing-in dimensions.
FINISHED WALL
9-1/2"
(223 mm)
3-3/4"
(97 mm)
5"
(127 mm)
7-3/8"
(187 mm)
74" (1879 mm)
FOR HEAD
CLEARANCE
4-1/8"
(105 mm)
18" (457 mm)
OPTIONAL
7-5/8"
(207 mm)
1-1/2"
2-3/4"
(83 mm)
(177 mm)
TOP OF TUB RIM
BOTTOM OF TUB
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Phillips Screwdriver
Teflon Tape
Flat Blade Screwdriver
2" TO 3"
(51 TO 76 mm)
1/2" NPT
7"
(160 mm)
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 78"
(1651 AND 1981 mm)
2-3/4" MAX. (69 mm)
1-3/4" MIN. (45 mm)
7-13/16" DIA.
(198 mm)
1/2" COPPER
7"
FOR SLIP-ON
4"
SPOUT
INSTALLATION
INSTRUCTIONS
TU106500
TU106501
TU106502
TU106507
TU106508
Adjustable Wrench
1 1
CARTRIDGE INSTALLATION
• Remove PLASTER GUARD (6)
(Keep it installed for thin wall Installation).
• Remove BONNET NUT (1) by unthreading it
Counter clockwise. Remove test CAP (2).
• Remove PROTECTIVE HOUSING (3) from
CARTRIDGE (4). Install with "UP" text on top.
• Reinstall BONNET NUT (1) onto VALVE BODY (5)
and tighten firmly with 12 Nm or 9 lbs/ft.
5
2
NOTE: Specified tightening torque
of BONNET NUT (1) is critical to
assure sealing function.
- 1 -
Channel Locks
1
3
4
M965929 Rev. 1.0 (12/18)
6
Tabla de contenido
loading

Resumen de contenidos para American Standard Patience TU106500

  • Página 9: Equilibrio De Presión Juego De Accesorios De Baño Y Ducha Con Desviador

    Juego de Accesorios de Baño y Ducha con Desviador TU106.507 TU106.508 Gracias por elegir American Standard, el punto de referencia de óptima calidad durante más de 100 años. Para realizar la instalación sin problemas, lea atentamente estas instrucciones antes de comenzar.
  • Página 10: Instalación En Pared Estándar

    INSTALACIÓN EN PARED ESTÁNDAR • Figura 1. Retire el protector de yeso de la válvula. Empuje la TAPA (1) por encima del CARTUCHO DE LA VÁLVULA (2) hasta que esté apoyada contra el dispositivo de retención. • Figura 2. Empuje el CHAPETÓN (3) en la TAPA (1) y fije le cuerpo de la válvula usando los TORNILLOS LARGOS (4).
  • Página 11: Ajustar Cierre De Límite De Agua Caliente

    AJUSTAR CIERRE DE LÍMITE DE AGUA CALIENTE • Al restringir la rotación de la MANIJA y limitar la cantidad de agua caliente que se permite mezclar con la fría, el CIERRE DE SEGURIDAD DE LÍMITE DE AGUA CALIENTE (1) reduce el riesgo de quemaduras accidentales.
  • Página 12: Comprado Por Separado

    Patience Equilibrio de Presión Juego de Accesorios de Baño y Ducha con Desviador NÚMEROS DE MODELO TU106.500 TU106.501 TU106.502 M970092-YYY0A Brazo y brida de la ducha TU106.507 TU106.508 1660738.YYY Reemplace las “YYY” por el Cabeza de la ducha código de acabado (1.75 gpm) correspondiente 1660739.YYY...

Tabla de contenido