Idiomas disponibles
Idiomas disponibles
Loading Material
4.2
Loading Fanfold Media
5
Figure 12
Feed path of fanfold media
f Turn ring (2) counterclockwise, so that the arrow points to the symbol
stop (1).
f Position guides (5) so that they are several millimeters wider than the material.
f Position media stack (4) behind the printer. Ensure that labels on the strip are visible from above.
f Guide the media strip over the roll retainer (3) to the print unit.
f Move the margin stop (1) against the media strip until both margin stops touch the media strip without
clamping or bending it.
f Turn ring (2) clockwise, so that the arrow points to the symbol , and thus fix the margin stop (1) on the
roll retainer (3).
f Insert media strip into printhead (→ „4.1.2 Inserting the Media into the Printhead" on page 49).
f Set the label sensor (→ „4.1.3 Setting the Label Sensor" on page 49).
f Set the head locking system (→ „4.3 Setting the Head Locking System" on page 51).
f Turn lever (5) clockwise to lock the printhead.
50
1
2
3
4
, and thus release the margin
2599440000/00/04.2019
