Clarion NX500 Manual De Instrucciones Y De Instalación página 19

Basic Operations
Adjusting the volume
Turn the volume knob to adjust the volume.
Clockwise : Increases the volume.
Counter- clockwise : Decreases the volume.
• The volume level indicated in the display is
in a range from 0 (min.) to 40 (max.).
CAUTION
While driving, keep the volume level at which
external sounds can be heard.
Mute
Press the [MUTE] [PWR] button to turn mute
On and Off.
Adjusting the Settings
1. Press [Setup] to enter setting menu mode.
2. Press the desired mode button.
Modes come in the following order:
• General, including Clock settings, Beep,
Camera Image, Radio Field, Tel Mute, Tel
SP, Aux In Input SW, Version.
• Video, Audio, Navigation, Misc.
. Perform the adjustment for the desired item.
See the following sections fo details.
Adjusting the Audio
1. Press the [EQ] button on the screen or
the [SEL] button on the remote control.
2. Touch the item key to adjust.
. Perform the adjustment.
See the following sections for detail.
4.Touch the [ ] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Adjusting the Balance/Fader
1. Touch the BALANCE or FADER in the
Audio Settings.
2. Touch the [F] or [R] key to adjust to the
fader level.
• The factory default setting is "0".
(Adjustment range: front 9 to rear -9)
. Touch the [L] or [R] key to adjust to the
balance level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9)
Adjusting the Bass
The bass gain and bass frequency can
be adjusted as follows.
1. Touch [ ] or [ ] key to set the
desirable level.
2. To set the bass center frequency, enter
the Audio adjustment in the SETUP menu.
Adjusting the Treble
The treble gain and treble frequency can
be adjusted as follows.
1. Touch [ ] or [ ] key to set the desirable
level.
2. To set the treble center frequency, enter
the Audio adjustment in the SETUP menu.
19
NX500/NZ500