Parkside PWCA 20-Li A1 Instrucciones De Uso página 19

Switching off
Hold down the ON/OFF switch 6.
♦
The indicator LED 7 goes out after a short time.
Charging/operating a USB device
NOTE
► If only a small amount of current (< 130 mA) is
drawn, the battery adapter will switch itself off
after a short time. The charging or operation of
such a device is therefore not possible.
Connect your USB device to the USB port 8
♦
of the battery adapter 3.
Press the ON/OFF switch 6 to activate the
♦
battery adapter 3. The indicator LED 7 lights
up continuously to indicate the supply of power.
Your device can now be charged or operated
on the battery adapter 3.
To turn off the USB port 8, press the ON/OFF
♦
switch 6 again for around two seconds.
│ GB │ IE
■ 14 PWCA 20-Li A1