Idiomas disponibles
Idiomas disponibles
Assembly - Attaching the Blades
1
Attaching the blade bracket
□
Fasten the blade bracket (I) to the motor (E) by inserting the
alignment post into the slot on the bottom of the fan-motor
assembly (E) and tightening the motor screws (GG) that are
pre-assembled to the blade bracket (I).
□
Repeat for the remaining four blade brackets (I).
2
Attaching the fan blades
□
Mount the fan blade (H) to the blade bracket (I) by aligning the
three key-slot holes in the blade (H) with the three posts on
the top of the blade brackets (I).
□
Hold the blade (H) close to the blade bracket (I) and press the
blade (H) down firmly. Ensure the key-slot holes are properly
seated on the blade arm posts.
□
While still holding the blade (H) down, firmly slide the blade (H)
away from the bracket (I) side until the blade (H) engages in
the locking mechanism.
□
Make sure the locking mechanism at the rear of the blade
bracket (I) springs upward and butts against the edge of the
blade (H) indicating a secure connection.
□
Visually inspect the top of the blade bracket (I) to ensure the
E
locking mechanism is securely in place.
□
Repeat for the remaining blades (H).
I
GG
11
NOTE: This fan features QuickInstall
blade installation.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
blades for fast and easy
TM
E
H
I
