Johnson Controls YORK EUKC 12 FT Instrucciones De Manejo página 11

Error codes (Fig. 17)
Should the unit undergo a malfunction while
in operation, an error code will be displayed
on the control display.
Meaning of the error codes:
Code Error
E0 Drain pump
E1 Compressor high pressure
E2
Ice on indoor coil
E3 Compressor low pressure
E4 Compressor discharge temperature
E5 Compressor overload
E6 Communication error
E8
Indoor fan protection
E9 Water tank full
F0 Indoor temperature sensor
F1
Evaporating unit coil sensor
F2 Condensing unit coil sensor
F3 Outdoor temperature probe
F4 Outdoor discharge sensor
Ambient temperature probe in remote control
F5
unit
ERROR
Fig. 17
3. Remote control unit
Main functions of remote control
unit:
Attention:
- Make sure there are no obstacles between
the control unit and the receiver.
- The signal can be received from a dis-
tance of up to 10 metres.
- Use the remote control unit carefully.
Neither throw it around nor let it drop.
- Do not leave the remote control unit in di-
rect sunlight or near any source of heat.
The name and function of each button are
shown in Fig. 18.
SWING FUNCTION
PRESS THIS BUTTON TO
ACTIVATE OR DEACTIVATE
AUTOMATIC VANE MOVEMENT.
TEMPERATURE FUNCTION
BUTTON TO VARY THE
THE DESIRED TEMPERATURE
CONTROL UNIT TEMPERATURE
CAN BE INCREASED UP TO 30°C
AND DECREASED DOWN TO 16°C
OPERATING MODE
BUTTON TO SELECT MODE
IN SEQUENCE BETWEEN:
AUTO
Remote control unit functions (cover open)
(Fig. 19).
MODE
SWING
AUTO FAN
FAN
AUTO
SLEEP
TIME
ON/OFF
SWING
AUTO FAN
AUTO
MODE
FAN
OPER
��
MODE ON/OFF
GB
FAN
PRESS THIS BUTTON TO
FAN
SELECT FAN SPEED.
OPER
AUTO FAN
��
ON/OFF BUTTON
ON/OFF
Fig. 18
LIQUID CRYSTAL DISPLAY
DISPLAYS SELECTED
FUNCTIONS.
NOTE: CLOSING THE
COVER DOES NOT CHANGE
THE CONTENT.
Fig. 19
COOL
DRY
FAN
HEAT
11