Idiomas disponibles
Idiomas disponibles
AC/power precautions
Read all AC/power precautions before installing or
operating the projector.
Warning! If not avoided, the following
could result in death or serious injury.
• FIRE HAZARD! Do not use a power cord, harness,
or cable that appears damaged.
• FIRE OR SHOCK HAZARD! Do not overload power
outlets and extension cords.
• SHOCK HAZARD! Only use the AC power cord provided
with the product or recommended by Christie.
• FIRE AND SHOCK HAZARD! Do not attempt
operation unless the power cord, power socket, and
power plug meet the appropriate local rating
standards.
• SHOCK HAZARD! Do not attempt operation if the
AC supply is not within the specified voltage and
current, as specified on the license label.
• SHOCK HAZARD! The AC power cord must be
inserted into an outlet with grounding.
• SHOCK HAZARD! Disconnect the product from AC
before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• Install the product near an easily accessible AC
receptacle.
Laser safety precautions
This product is classified as Class 1 Laser Product-Risk
Group 2 according to IEC 60825-1:2014 complies with
FDA regulations 21 CFR 1040.10 and 1040.11 as a Risk
Group 2, LIP (Laser Illuminated Projector) as defined in
IEC 62471- 5:2015 except for deviations pursuant to
Laser Notice No. 57, dated May 8, 2019.
Warning! If not avoided, the following
could result in death or serious injury.
• This projector has a built-in Class 4 laser module.
Never attempt to disassemble or modify the
projector.
• Any operation or adjustment not specifically
instructed in the User manual creates the risk of
hazardous laser radiation exposure.
• Do not open or disassemble the projector as this
may cause damage or exposure to laser radiation.
• Do not stare into beam when the projector is on.
The bright light may result in permanent eye
damage.
• When turning on the projector, make sure no one
within projection range is looking into the lens.
Inspire Series-4K Product Safety Guide
020-002096-01 Rev.1 (06-2023)
Copyright @2023 Christie Digital Systems USA Inc. All right reserved.
If printed, please recycle this document after use.
Important Safety Information
Power requirements
Parameter
Requirement
Power rating
100-240 VAC, 50/ 60 Hz, 6.5A
Power consumption
650 W maximum
Technical support for Christie
Enterprise products is available at:
• North and South America: +1-800-221-8025 or
• Europe, Middle East, and Africa: +44 (0) 1189
778111 or [email protected]
• Asia Pacific ([email protected]):
• Australia: +61 (0)7 3624 4888 or
• China: +86 10 6561 0240 or
• India: +91 (80) 6708 9999 or
• Japan: 81-3-3599-7481
• Singapore: +65 6877-8737 or
• South Korea: +82 2 702 1601 or
• Christie Professional Services: +1-800-550-3061 or
4
