Idiomas disponibles
Idiomas disponibles
• Hold tool firmly with two hands. Use auxiliary handle if provided. If auxiliary handle
not provided, grip tool at bottom of battery. Loss of control can cause personal injury.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to the State of
california to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding,
drilling, and other construction activities. Wear protective clothing and wash
exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or
lay on the skin may promote absorption of harmful chemicals.
WARNING:
use of this tool can generate and/or disperse dust, which may
cause serious and permanent respiratory or other injury. Always use NIOSH/
OSHA approved respiratory protection appropriate for the dust exposure. Direct
particles away from face and body.
WARNING:
safety glasses. Also use face or dust mask if cutting operation is dusty.
AlWAyS WeAR ceRtIfIed SAfety eQuIPMeNt:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
• ANSI S12.6 (S3.19) hearing protection
• NIOSH/OSHA/MSHA respiratory protection
The label on your tool may include the following symbols.
V ........................... volts
Hz ......................... hertz
min ........................ minutes
or DC ............ direct current
.......................... Class II Construction
.......................... safety alert symbol
............Read instruction manual before use
.....................Use proper eye protection
IMPoRtANt SAfety INStRuctIoNS foR BAtteRy cHARGeRS
SAve tHeSe INStRuctIoNS: This manual contains important safety instructions for
battery chargers.
• Before using charger, read all instructions and cautionary markings on charger, battery
pack, and product using battery pack.
WARNING:
cAutIoN:
Burn hazard. To reduce the risk of injury, charge only designated Porter
Cable batteries. Other types of batteries may burst causing personal injury and damage.
cAutIoN:
Under certain conditions, with the charger plugged in to the power supply, the
charger can be shorted by foreign material. Foreign materials of a conductive nature such as,
but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept
away from charger cavities. Always unplug the charger from the power supply when there is
no battery pack in the cavity. Unplug charger before attempting to clean.
• do Not attempt to charge the battery pack with any chargers other than the ones in
this manual. The charger and battery pack are specifically designed to work together.
• these chargers are not intended for any uses other than charging designated
Black & Decker rechargeable batteries. Any other uses may result in risk of fire,
electric shock or electrocution.
• do not expose charger to rain or snow.
• Pull by plug rather than cord when disconnecting charger. This will reduce risk of
damage to electric plug and cord.
AlWAyS use safety glasses. everyday eye glasses are Not
Shock hazard. Do not allow any liquid to get inside charger.
A ......................... amperes
W ........................ watts
or AC ..............alternating
n o ....................... no load speed
........................ earthing terminal
.../min ..................revolutions or
..................Use proper respiratory protection
..................Use proper hearing protection
4
current
reciprocations
per minute
