Johnson TURIA180 Manual De Instrucciones página 71

Idiomas disponibles

Idiomas disponibles

Problem
Door unlocks
or press
Pause/Add
a Garment
and machine
doesn't
operate
Water does
not enter
washer or
enters slowly
Wrinkling
Possible Cause
This is normal
Incorrect operation
Automatic self system
checks
Water supply is turned off • Turn on water supply.
Water valve screens are
stopped up
Improper sorting
Overloading
Incorrect wash cycle
Repeated washing in
water that is too hot
What To Do
• Front-load washers start
up differently than top-
load washers, and it takes
30 seconds to check the
system. The door will lock
and unlock.
• Simply open and close
the door firmly; then
press
• After
washer does several
system checks. Water will
flow 60 seconds after
• Turn off the water source
and remove the water
connection hoses from
the upper back of the
washer. Use a brush or
toothpick to clean the
screens in the machine.
Reconnect the hose and
turn the water back on.
• Avoid mixing heavy items
(like work clothes) with
light items (like blouses).
• Load your washer so
clothes have enough
room to move freely.
• Match cycle selection to
the type of fabric you are
washing (especially for
easy care loads).
• Wash in warm or cold
water.
33
.
is pressed, the
is pressed.
V .1
loading