Gima Cardio B Manual De Uso Y Mantenimiento página 27

27
3.6.2 Language Setting
1. On system setting screen, select "Language" to enter language information
screen, as shown in Figure 3-25.
2. Press the Navigation Key to select the language between "Chinese" and
"English".
3. Press " OK" button to save setting and return to the upper level menu
screen..
3.6.3 Brightness Setting
1. On system setting screen, select "Brightness" to enter brightness setting screen,
as shown in Figure 3-26.
2. Adjust brightness with Navigation Key; 1~7 level adjustable;
3. Press " OK" button to save setting and return to the upper level menu screen.
3.6.4 Beeper Setting
1. On system setting screen, select "Beeper" to enter beeper setting screen, as
shown in Figure 3-27.
2. Choose "ON" or "OFF" with Navigation Key to turn on the beeper or turn off
the beeper; the default setting is "ON".
3. Press " OK" button to save setting and return to the upper level menu screen.
Figure 3-27 Beeper Setting
3.6.5 Measure Mode Setting
1. On system setting screen, select "Measure mode" to enter measure mode setting screen, as shown in Figure 3-28.
2. Choose "Normal" mode or "Enhanced" mode with Navigation Key. The default setting is "Normal" mode.
Normal mode: can filter the interference signal in ECG waveform.
Enhanced mode: can better reflect the fidelity of ECG waveform.
3. Press " OK" button to save setting and return to the upper level menu screen.
3.6.6 Resume Default
1. On system setting screen, select "Default setting" to enter into default setting screen, as shown in Figure 3-30.
2. Choose "YES" or "NO" with Navigation Key. If the choice is "YES", then press "
settings will resume default settings.
3. Press " Return" button to back to upper level menu.
3.6.7 Version Info
On system setting screen, select "Version" to enter version information screen,
as shown in Figure 3-30. Figure 3-31 Version Information
3.7 Help
On main menu screen, select "Help", then press "
info screen. It provides different kinds of illustrations for ECG measuring methods.
Refer to Section 3.2.1 for ECG measuring methods in details.
Figure 3-28 Measure Mode Setting
OK" button to enter help
ENGLISH
Figure 3-25 Language Setting
Figure 3-26 Brightness Setting
Figure 3-30 Default Setting
OK" button, all the parameter
Figur3 3-31 Version information