Idiomas disponibles
Idiomas disponibles
Installation (continued)
INSTALLING THE STRAINER
- Apply plumbing putty or silicone sealant to the top side of the
drain opening .
- Insert the strainer body (1) into the drain opening and press it
down until it is evenly seated .
- Assemble the rubber gasket (2), fiber washer (3) and strainer
locknut (4) onto the strainer body (1) from underneath the
sink . Hand tighten the strainer locknut (4) until it is snug . Do
not overtighten .
- Insert the plastic flange (5) into the flange-end of the tailpipe
(6) (not supplied) then secure the tailpipe to the strainer body
using the connecting nut (7) . Tighten the connecting nut (7)
until it is snug . Do not overtighten .
- Remove excess sealant from around the drain opening .
MOUNTING THE UTILITY SINK
- Carefully place a bead of sealant all around the top of the
cabinet (A) .
- Ease the sink (D) into the cabinet (A) . Ensure that it is placed
evenly and is centered on the cabinet . Wipe off any excess
sealant . Use masking tape to hold the sink in place until the
sealant dries .
QL102
Sink
D
A
8
Strainer Basket
Strainer Body (1)
Sealant
Rubber Gasket (2)
Fiber Washer (3)
Strainer Locknut (4)
Plastic Flange (5)
Tailpipe (6)
(not supplied)
Connecting Nut (7)
