Idiomas disponibles
Idiomas disponibles
Installation (continued)
PLACEMENT
Push the cabinet (A) against the wall . Position cabinet as desired . If required, level it by adjusting the four leveling feet and checking the
alignment of the sink (D) using a carpenter's level .
IMPORTANT:
Secure the cabinet to the wall using hardware best suited for your wall type. Failing to do so could result in property damage or
personal injury.
Use silicone sealant to seal the sink to the wall and any adjacent surfaces to keep those surfaces dry. Failing to do so could result in
moisture damage.
DRAINAGE
The tailpipe (not supplied) previously installed to the drain can now be connected to your household plumbing . In some cases, your
household plumbing will have to be modified to ensure proper drainage. If so, please consult a licensed plumber to complete
needed modifications.
FINAL INSPECTION
- Connect the supply lines to your home's water supply as per
manufacturer's instructions .
- Open your home's hot and cold water supply valves and
carefully inspect all connections for leaks .
- Move the valve handle (13) to the open mixed position by
turning it to the middle and pulling it away from the faucet .
- Run the water uninterrupted for about one minute to remove
any residue from the lines and inspect all connections for
leaks once again .
9
Please contact [email protected] or 1-877-333-0098 for further assistance .
Valve Handle (13)
CONGLOMKB .COM
