Idiomas disponibles
Idiomas disponibles
FEATURES
ES
▶Power: 45W
▶Speeds: 3 levels
▶Fixed or oscillating position
PT
▶security grill
▶Blade diameter: 40cm
▶Heights: min.100 - max.120cm
EN
▶Oscillating
FAN PARTS
1. Fan base
FR
2. Plastic cover - union with the base
3. Bar
4. Measurement adjustment thread
5. Interior bar
6. Nut
7. Power switches
8. Connection box
9. Engine cover
10. Oscillation button
11. Axis
12. Base of the lid
13. Nut for base of the lid
14. Helix
15. Nut for the base of the lid
16. Cover of the grid
Instruction manual
ASSEMBLY INSTRUCTIONS
1. Remove all packaging carefully. Avoid scratching the
plastic covers with scissors or knives.
2. Mount the bars of the fan base crossing them. Be sure to
align the four orifices.
3. Press the four screws from the bottom to the top with the
main bar.
4. Insert the plastic trim
5. Put the base of the rear cover of the motor and then use
a nut to hold it. Place the propeller on the front axle of the
engine and then use the nut to secure it.
6. Cover it with the front protection using the screw to
secure it to the base.
7. Insert the completed fan body into the inner tube. And
finally, use the nut to lock the body with the fan.
RUNNING
▶Through the 3-speed system you can start the fan, this system is
IMPORTANT NOTES
▶Place the fan on a flat, dry surface.
▶Before connecting the device to the network, make sure that the
▶Plug the power cord into the outlet 220-240V ~ 50/60Hz
▶If you do not use the fan for a long time, please unplug the power
▶Never try to disassemble the device where the motor is located.
▶If you notice any abnormality (such as unusual fan noise), turn off
designed to give you maximum flexibility. You can also activate the
oscillation function using the oscillation slider.
• POSITION 0: OFF position, no button pressed.
• POSITION 1: first gear
• POSITION 2: second gear
• POSITION 3: third gear
• SWING: swing button / set direction (num.10)
switch is in the "0" position.
cord from the outlet.
the device and unplug it immediately.
Ref. 33500
