Idiomas disponibles
Idiomas disponibles
C
C
Using the appliance
Utilisation de l'appareil
• The connection must comply with the national regulations in force.
• The specifications of the power supply must correspond to those shown on the rating plate
of the appliance. Open the door to see the nameplate.
• The power cable of the appliance must comply with the values in the "Technical
specifications" table.
Before carrying out any work on the electrical
installation, the appliance must be unplugged from the
power supply network. Not doing so can pose a risk of
electric shocks!
The power cable plug must be easily accessible after
the appliance is installed (it must not be lying on top of
the hob).
T h e w i r i n g m u s t co m p ly w i t h n a t i o n a l / l o c a l
electrical regulations. In addition, you should use
the recommended sockets and plugs for ovens. If the
power limit of the appliance is greater than the current
carrying capacity of the plug and socket, connect the
appliance directly to a fixed electrical installation
without using a plug or socket.
Plug the power cable into the outlet.
Installing the product
• Slide the oven into the cabinet. Align it and secure it making sure that the power cable is
not broken and/or trapped.
24
24
FR
FR
C
C
Using the appliance
Utilisation de l'appareil
• Secure the oven with the 2 screws, as shown in the illustration.
• After installation, make sure that the screws are tight enough and that the oven does not
move. The oven may tip over during use if it is not installed according to the instructions and
if the screws are not tightened enough.
For products equipped with a fan: (this may not be available on your product.)
1
Fan
2
Control panel
3
Door
The integrated fan cools both the cabinet surrounding the appliance and the front of the
latter.
25
25
1
2
3
EN
FR
