Domo DO733K Manual De Instrucciones página 40

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
MAKING ICED COFFEE
1.
Open the lid of the machine and fill the water reservoir with water for at
least 6 cups using the glass coffee pot.
2.
Insert a paper filter (size 4) into the filter holder. Or use the included
reusable filter.
3.
Add the desired amount of ground coffee to the filter. For iced coffee, it
is best to use 10 scoops (60 grams) of ground coffee. Despite filling the
water reservoir for 6 cups, you will have around 10 cups of coffee due to
the ice in the pot. Close the lid.
4.
Fill the pot with 500-550 g of ice cubes. Place the insulating mat on the hot
plate. Place the pot on the mat under the drip stop.
5.
Plug the power cord into the outlet and press the on/off button [ON/OFF].
6.
Press the button for the iced coffee function [Ice Coffee]. The indicator
lights above the button for iced coffee and above the on-off button switch
on and the coffee will start to flow.
7.
The cup quantity defaults to 6 cups. The coffee strength is predetermined as well. For the best
results, the brewing process has to be quick.
8.
When your coffee is ready, you will hear a signal and the red indicator light on the display
disappears.
POINTERS FOR GREAT COFFEE
·
A clean coffee maker is essential to make great tasting coffee. Clean the appliance regularly according
to the guidelines. Always use fresh, cold water in the coffee maker.
·
Store coffee in a dry and cool place.
·
Do not reuse any coffee, as this will greatly affect the taste of your coffee. We also do not recommend
reheating coffee.
·
The device will keep the coffee warm for up to 40 minutes (not for iced coffee or coffee "on the go").
To maintain an optimal coffee taste, it is best to serve the coffee right after brewing.
SETTING THE TIMER
1.
Make sure the time is set correctly.
2.
Prepare the appliance to set coffee as indicated under "use" but do not press the on/off button yet.
3.
Press the timer button [Brew Later]. The symbol above the timer button
says "00:00".
4.
To set the timer, press the hours button and the minutes button. Hold down the button to fast-
forward the display.
5.
Wait for a few seconds or press the timer button again to confirm. The symbol above the timer
button
lights up instead of flashing. The display reverts back to the current time.
6.
The coffee will begin to run at the time that has been set using the timer.
·
Attention: set the desired time while the symbol above the timer button is flashing. When the symbol
stops flashing, the clock time can be configured with the [HR] and [MIN] buttons.
·
If you want to cancel the timer function, press the on-off button. The symbol
disappear.
40
DO733K
flashes and the display
on the display will
loading