Teufel BOOMSTER GO Guia De Inicio Rapido página 5

EN 5
Charging the BOOMSTER GO
The Boomster Go (1) has a built-in lithium-ion rechargeable battery which
can be charged with the charging cable (5). To charge the Boomster Go,
connect it to a computer, powerbank or a USB charging plug which is
plugged into to a mains socket.
The charging process begins as soon as the Boomster Go is connected to a
power source using the charging cable. The current charge level is shown
by the charge indicator LEDs (2).
100 % All 3 LEDs are illuminated
66–99 % 2 LEDs are illuminated, 1 is fl ashing
33–65 % 1 LED is illuminated, 2 are fl ashing
<32 % Sequential light with all three LEDs
As soon as the rechargeable battery is fully charged, the auto function will
deactivate the charging process – any ongoing playback is not interrupted.
The rechargeable battery's charge level is shown by briefl y pressing the
button (3).
66–100 % All 3 LEDs are illuminated
33–65 % 2 LEDs are illuminated
11–32 % 1 LED is illuminated
6–10 % Warning tone, 1 LED blinks slowly (1/second)
<6 % Warning tone, 1 LED blinks quickly (2/second)
(1)
(2) (3) (4)
(5)
Note: The charging cable's micro
USB connector should be plugged
into the Boomster Go's micro USB
port (4), while the charging cable's
USB Type-A plug should be con-
nected to a power source.