Idiomas disponibles
Idiomas disponibles
OPERATION
TO ATTACH/DETACH THE
BATTERY PACK (Fig. 13)
Charge the battery pack(s) before
first use!
WARNING:
or missing, do not attempt to attach the
battery pack to the mower or operate the
mower until the broken or missing parts
are replaced. Failure to do so could result
in serious injury.
NOTE:
The mower can operate off of one or two batteries. Using two batteries
gives you a longer run time and efficient power draw managed by PEAK POWER™
technology.
1. The battery cover is hinged. Raise the battery cover by lifting the front of the
cover.
2. The mower is equipped with two battery compartments, which accommodate two
battery packs at the same time.
3. Align the grooves in the battery pack, with the raised ribs in one of the battery
compartments, and then insert the battery pack into the compartment.
4. Push the battery pack until you hear a "click". The battery-release button will
spring up when the battery pack is securely attached.
5. Attach the other battery pack into the other battery compartment in the same
way.
6. To detach the battery pack, depress the battery-release button to release the
battery pack, and then lift it out of the compartment.
7. Close the battery cover.
NOTICE:
Make sure that the latch on the mower snaps into place and that the battery
pack(s) are secured to the mower before starting operation.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2140SP/LM2140SP-FC
If any parts are broken
13
Battery-Release Button
Battery Cover
27
