Idiomas disponibles
Idiomas disponibles
16 • ENGLISH
c. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
6. Electrical safety
La herramienta lleva un doble aislamiento; por lo
tanto no requiere una toma a tierra. Compruebe
siempre que la tensión de la red corresponda al
valor indicado en la placa de características.
Warning! If the power cord is damaged, it must be
replaced by the manufacturer, authorized
Black & Decker Service Center or an equally
qualified person in order to avoid damage or injury.
If the power cord is replaced by an equally qualified
person, but not authorized by Black & Decker, the
warranty will not be valid.
Guide for Cable Use of Extension
Cable
Until 5m
Type
Parallel
1,5mm
From 5
Above
to 20m
2,5mm
2
2
recommended
7. Labels on tool
The label on your tool may include the following symbols:
Read
Instructions
Manual
Use
Eye
Protection
Use
Ear
Protection
Warning!
Read the manual
prior to operation.
Caution!
Flying debree.
Keep your
distance.
Do not expose the
appliance to rain or
high humidity.
Risk of electrical
shock.
ADDITIONAL SAFETY INSTRUCTIONS
Training
► Read the instructions carefully. Be familiar with the
controls and the proper use of the appliance.
► Do not allow children or any person unfamiliar with
these instructions to operate the appliance. Local
regulations may restrict the age of the operator.
► Never use the appliance while people, especially
children, or pets are nearby.
► Remember that the operator will be held responsible
for accidents or hazards occurring to other people or
20m
their property.
Not
Preparation
► Wear stout shoes or boots to protect your feet. Do not
operate the appliance wearing open-toed sandals or
when barefoot. Wear long trousers to protect your legs.
► Wear safety glasses or goggles when operating this
tool. Use a face or dust mask whenever the operations
take place in dusty surroundings. Hearing protection
should be worn whenever the sound level seems
uncomfortable.
► Guard against electric shock. Prevent body contact
with earthed or grounded surfaces (e.g. metal railings,
lampposts, etc.).
V ........ Volts
A ........ Amperes
Hz .......Hertz
W ........Watts
min ..... minutes
.... Alternating
Current
.... Direct
Current
n
....... No-Load
0
Speed
Keep the cable
away from
the cutting blades.
Beware of
sharp blades.
Remove the plug from
the socket if the mains
cable is damaged or
before maintenance.
Sound power
level.
Warning!
The blades will
continue to rotate
after the machine
is switched off.
FOR LAWNMOWERS
.... Class II
Construction
.... Earthing
Terminal
.... Safety
Alert
Symbol
.../min.. Revolutions or
Reciprocation
per minute
