Kamikaze KV 500 Manual De Uso página 75

ELECTRICAL PRUNING SHEAR
• Remove the blade fixing screw (8) and locking device (9), unscrew the nut
(10) and remove the blade pin(11):
• The moving blade can be replaced now (12). Add grease to the fix blade
in the indicated position(13):
• Repeat the inverse procedure to reassemble the tool. During the
reassemble operation add grease to the blade pins.
• Between operation 8 and 7, move the blade by hand to evaluate the
smooth relative movement between the blades. If the movement is
difficult the locking nut has to be released by one step. If there is lateral
freeplay the locking nut has to be tightened of one step.
75
www.kamikazevolpi.com