Kamikaze KV 500 Manual De Uso página 73

ELECTRICAL PRUNING SHEAR
15.2 LEAD SCREW GREASING
• This operation have to be performed each 3-4 working days to ensure
the tool working life.
• Use the grease provided within this tool or in any case Lithium Soap
grease NLGI class 2.
• With the tool connected to the battery, open the blades by pressing the
trigger(1), then switch off the battery and remove the cable (2):
• Remover the trigger protection by unscrewing the fixing screw (3),
disengage the protection from the rear side first (4) and from the front
side then (5):
• Check and remove any cutting residual from the zone below the trigger
protection. Unscrew the greasing screw from the actuation rod (6 ) and
apply the grease inside the hole (7):
• Repeat the inverse procedure to reassemble.
73
www.kamikazevolpi.com