Getting Started; Charging The Blood Pressure Module's Battery - Medisana CardioDock Instrucciones De Manejo

4 Getting Started

4.1 Charging the blood pressure module's
battery
The CardioDock blood pressure module has an integra-
ted lithium ion battery (3,7 V
a. For charging the CardioDock battery, connect the
CardioDock unit with an iPhone or iPad charging unit
via the supplied USB cable. When CardioDock unit
and iPhone are connected, the state of charge is dis-
played in the lower part of the VitaDock screen.
b. When the start/stop button
unit is highlighted in blue, the state of charge of the
battery is over 20 %. Should the charge level drop be-
low 20 %, the LED colour changes from blue to yellow.
Please charge the battery now. Avoid letting the battery
run down completely, as this shortens the battery's
service life.
c. During the charging process, the start button is high-
lighted in yellow, until the battery is fully charged.
When the battery is completely charged, the LED
shortly lights up in blue, before the unit automatically
switches off.
16
GB
If the LED of the start/stop button
flashing alternatively in yellow and blue,
the battery is defective.
— - -- —
, 500 mAh).
8
of the CardioDock
G
G
G
G
8
is