Wiring Instructions - Continued
WARNING
!
To Prevent Serious Injury or
Failure to observe these instructions could lead to severe injury or death
Death from Electrical Fire:
Do not route electrical cables
Read and follow all wiring
instructions included in
operators manual.
Install battery cables with red lead connected to the positive terminal of battery, and black lead to the
negative terminal of battery.
Verify that all wiring connections are clean and tight.
Before using the winch, verify the following:
Wiring to all components is correct.
There are no exposed wiring or terminals, cover any existing exposures with insulator plate,
terminal boots, heat shrink tubing or electrician's tape.
Warning
Shock & Fire Hazard
Never route electrical cables across sharp edges
Do not route electrical cables
Never route electrical cables through or near moving parts.
across sharp edges.
Always read and follow all wiring instructions included in operators guide.
through or near moving parts.
Always insulate and protect all exposed wiring and electrical terminals
Insulate and protect all exposed
wiring and electrical terminals.
PAGE 9
.
91728A0