Warn ZEON-12-S Manual Del Usuario

ZEON-12-S PLATINUM WINCH
Part Number: 95960
Rated Line Pull: 12,000 lbs. (5440 kgs)
Motor: 12V DC, Series Wound
Controls: Advanced Wireless Remote Control
Gear Train: 3-Stage Planetary
Gear Ratio: 162:1
Clutch (Freespool): Rotating Ring Gear
Brake: Automatic Direct Drive Cone
Drum Diameter/length: 3.15"/9.3" (8.0cm/23.6cm)
Kit Shipping Weight: 80 lbs (36.3 kgs)
Rope: Synthetic, Ø 3/8" x 80' (Ø 9.5mm x 24.4m)
Fairlead: Hawse
Recommended Battery: 650CCA Minimum for winching
Duty Cycle: Intermittent
Battery Leads: 2 GA, 72" (1.83m)
Finish: Black Powder Coat
Warranty: Limited Lifetime
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
Winch Dimensions: 24.25 L x 7.14" D x 10.52" H (615.9mm L x 181.6mm D x
267.1mmH)
WARN Industries, Inc.
All manuals and user guides at all-guides.com
95961A0
SERVICE INSTRUCTIONS
Should you encounter a problem during installation or operation of your winch, please
follow these steps toward resolving the problem:
1. Refer to your operator's guide and installation instructions. It has illustrations and
detailed information on the installation and safe and proper operation of your
winch. It also includes a replacement parts list and assembly diagrams. If you are
unable to resolve the problem, then go to step 2.
2. Contact your dealer where you purchased your winch. If, after discussing the
problem with their parts and service staff , you are still unable to resolve the
problem then go to step 3.
3. Call an Authorized WARN Service center from the list provided on the back of
the warranty sheet included with the product. When calling, please have the
following information available: winch model number and purchase date, make,
model and year of vehicle.
4. If you are unable to resolve the problem to your satisfaction, please call Warn
Industries Customer Service at: 1-800-543-9276. When calling, please have the
following information available: winch model number and purchase date, make,
model and year of vehicle. You may also contact Warn Industries by visiting our
website: www.warn.com
SERVICE/UPGRADE KITS
PN# ITEM
KIT 1 93338
(2)
(3)
(4)
(5)
9
10
11
12
13
14
17
19
21
KIT 2 93036
2
3
5
6
7
8
15
47
KIT 3 93596
1
2
3
KIT 4 93038 4
WARN Industries, Inc.
QTY DESCRIPTION
S/P ASSY_ULT PERF_TRANS_216
1 S/P ASSY_END HOUSING_ULT PERF
1 S/P END CAP
1 S/P REMOTE CLUTCH ASSY
1 S/P, DRUM SUPPORT, GEARTRAIN
1 SUN GEAR, 12T
1 CARRIER ASSY, STAGE 1
1 CARRIER ASSY, STAGE 2
1 WASHER, THRUST
1 CARRIER ASSY, STAGE 3
1 RING GEAR, 75T
1 DRIVE SPLINE
1 DRUM DRIVER
1 DRIVE SHAFT
S/P ASSY_END HOUSING_ULT PERF END
1 GASKET END CAP
10 TORX, PAN HEAD, M5-0.8X25
1 HOUSING_ULT PERF
1 PAWL STOP
1 ROTATING RING GEAR
1 RETAINING RING
1 GEARTRAIN GASKET
1 TORX, PAN HEAD, M5-.08X12
S/P END CAP
1 END CAP
1 GASKET, END CAP
5 TORX, PAN HEAD, M5-0.8X25
1 S/P ASSY_REMOTE CLUTCH
95961A0