Cleaning And Care - Carrera 521 Manual De Instrucciones

Dry shaving
NOTE:
Initial applications may result in a temporary redness or irritation of
● ●
the skin, since the skin must first get used to this type of shaving.
This is normal and usually takes between 2 and 4 weeks.
1. Remove the protective cap 1 from the shaving head.
2. Use the on/off switch 6 to switch on the shaver.
3. Hold the shaver at a right angle to the surface of the skin and move
it carefully and in circular motion over your face.
4. At parts of the face that are harder to shave, such as the chin, stretch
the skin to achieve a better result.
5. Shave against the direction of beard growth.
6. After shaving, switch off the shaver and clean the cutting elements
→●
carefully. (

07. CLEANING AND CARE).

NOTE:
This shaver is equipped with a multi-dimensional 3D swivel shaving
● ●
head with locking option. Move the locking switch 5 down to
achieve a better result using the moveable shaving head at more
complicated parts of the face (e.g. the chin and neck). If you want to
lock the shaving head, move the locking switch up.
Wet shaving
The appliance is also suitable for wet shaving (Wet & Dry).
● ●
ATTENTION!
The shaver is not waterproof. For wet shaves, the
appliance must be used in cordless mode. Never use the shaver in
the shower or in the bathtub.
Precision haircut
Use the precision trimmer on the rear of the shaver to shorten beard
and sideburns.
1. Remove the protective cap.
2. Open the precision trimmer with the release button 19 .
3. Use the on/off switch 6 to switch on the shaver.
4. After use, switch off and clean the appliance.(→ 07. CLEANING AND
CARE). Fold the precision trimmer back to its original position.
32 GB
Using the travel lock
This function prevents the shaver from being accidentally switched on
when travelling.
In order to activate the travel lock, press and hold the on/off switch
for 5 seconds. The shaver is switched off now and the padlock symbol
flashes several times. When pressing the on/off switch briefly, the
padlock symbol will flash and the shaver remains switched off.
In order to deactivate the travel lock, press and hold the on/off switch
for 5 seconds again. The shaver is being switched on and the charging
capacity display lights up in cordless operation.
If the shaver is connected to the mains for charging while the travel
lock is activated, the travel lock will be deactivated.
07. CLEANING AND CARE
DANGER! Risk of injury and material damage!
Unplug the mains adapter from the wall socket before cleaning
the appliance.
Never immerse the shaver in water.
● ●
WARNING!
Always switch off the shaver before cleaning.
CAUTION! Material damage
Do not use any harsh or abrasive cleaning agents.
It is advantageous to lock the shaving head during the cleaning
● ●
process. This also applies to the cleaning and replacement of the
foil or blade.
Neither remove the shaving foil frame from the shaving head
● ●
frame nor the shaving foil from the shaving foil frame. Do not
clean the shaving foil with the brush.
Do not pull the cutting blades off the holder to clean them.
● ●
Remove the shaving foil frame and cutting blades for replace-
● ●
ment only (see "Replacing the parts", page 35).
NOTE: Clean the appliance after each use to maintain optimum
● ●
functionality.
GB 33