Switching The Appliance On; Setting The Language; Setting The Temperature Unit; Setting The Temperature - Gaggenau RC 472 Manual De Uso Y Cuidado

Switching the Appliance On

Switch the appliance On with the POWER Button ÿ.
The appliance begins to cool. Light turns on when
the door is open.
,
CAUTION:
Keep hands and fingers away from front and rear
openings of the refrigerator door when closing. Risk
of injury to hands or fingers!
Never allow children to climb on or play with
the refrigerator door.
Operating Tips
▯
When the appliance has been switched on, it may
take several hours until the set temperature is
reached.
▯
The fully automatic No Frost system ensures that
the Freezer Compartment remains free of ice.
Defrosting is not required.

Setting the Language

The Display Languages can be changed according
to the table in the chapter "Special Functions",
section "Setup Mode".
To change the Display Language:
Press the SETUP Button μ.
1.
Press the ¾ or ¿ Selection Button, until the set
2.
language is displayed.
Press the @ or A Setting Button, until the desired
3.
language is displayed.
Press the SETUP Button μ, in order to store
4.
the settings.
The set temperature is displayed again on the
Display Panel.

Setting the Temperature Unit

The temperature can be displayed in degrees
Celsius (°C) or degrees Fahrenheit (°F).
Press the SETUP Button μ.
1.
The first menu (Temperature Unit) is displayed.
Press the @ or A Setting Button in order
2.
to switch between degrees Fahrenheit (°F) and
degrees Celsius (°C).
Press the SETUP Button μ, in order to store
3.
the settings.
The set temperature is displayed again on the
Display Panel.

Setting the temperature

Refrigerator Compartment
(can be selected from +35 °F (2 °C)
to +46 °F (8 °C))
We recommend a setting of +37 °F (3 °C).
Perishable food should not be stored above +37 °F.
Press the ¾ Selection Button.
1.
Set the temperature with the @ (warmer) or A
2.
(cooler) Setting Buttons.

Special Functions

The following Special Functions can be selected
or displayed:
Setup Mode
In Setup Mode you can make your personal settings.
Switching On
Press the SETUP Button μ.
The first menu (temperature unit) is displayed on the
Display Panel.
9