Description Of Appliance And Accessories - Imetec P1501 Instrucciones De Uso

Refer to the figure in the illustrative guide to check the contents of the packaging. All the
figures can be found on the inside pages of the cover. See the external packaging for the
characteristics of the appliance.
1. Handle
2. Manual air flow adjustment device
3. Telescopic suction pipe
3A. Telescopic pipe adjustment button
3B. Adjustable telescopic pipe
4. Combined carpet/hard floor brush
4A. Brush position toggle switch
5. Flexible suction hose
6. Electronic power regulator
7. ON/OFF switch
8. Dust collection container flap
9. Suction connection
10. Dust collection container opening lever
11. Carry handle
12. Vertical parking position coupling
13. Technical data
14. Automatic cable winding button
15. Power cable
• Connect the flexible suction hose (5) to the suction connection (9) on the appliance, turning
the base clockwise until it locks in place [fig. B1].
• Connect the handle (1) of the flexible hose to the telescopic suction pipe (3).
• Adjust the length of the telescopic pipe by sliding the telescopic pipe adjustment button
(3A) in the direction of the arrow or retracting the adjustable telescopic pipe (3B) [fig. C1].
• Select the combined carpet/hard floor brush (4) or the accessory suitable (17) for the
surface you want to clean and connect this to the suction pipe (3).
Combined carpet/hard floor brush (4)
Adjust the combined brush according to the type of floor, using the brush position toggle
switch (4A) [fig. D1] to switch from the ceramic tile position to the rug/carpet position.
Your appliance comes with the following accessories:
Furniture nozzle (17B): For cleaning sofas, armchairs, upholstered chairs and curtains.
Multipurpose nozzle (17A): For cleaning small objects, sound systems and televisions,
computers and furniture.
Wooden floor brush (17C): Special brush for cleaning wooden flooring.
NOTE: The accessories can be connected to the telescopic suction pipe (3) or directly
to the handle (1).
DESCRIPTION OF APPLIANCE
AND ACCESSORIES
ASSEMBLY
ACCESSORIES
16. Dust collection system
16A. Lid opening lever
16B. Handle
16C. HEPA pre-motor filter
16D. Dust container
16E. Pre-motor filter
16F. HEPA pre-motor filter locking lever
17. Accessories
17A. Multipurpose nozzle
17B. Furniture nozzle
17C. Wooden floor brush
18. Horizontal parking position coupling
19. Exhaust filter
20. Exhaust filter grille
21. Exhaust filter grille release/lock button
EN
14