to the vacuum cleaner.
•
Always use the appliance with a motor protection filter to prevent damaging
the motor and the vacuum cleaner.
•
The power cable must always be fully unwound to prevent hazardous
overheating.
ON/Off switch
Prohibited
Carpets and rugs
Dust collection system release button
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES (Fig. A)
Refer to figure [A] in the illustrative guide to verify your appliance equipment. All the figures
are on the cover pages of these instructions for use.
1. Handle
2. Air flow manual adjustment device
3. Telescopic suction pipe
3A. Telescopic pipe adjustment button
3B. Adjustable telescopic pipe
4. Combination carpet/floor brush
4A. Brush position toggle switch
5. flexible suction pipe
6. flexible suction pipe locking buttons
7. Electronic power regulator
8. ON/Off switch
9. Dust collection system release button
10. Carry handle
11. Suction inlet
12. Coupling for vertical parking position
13. Technical data
14. Power cable
•
Connect the flexible suction pipe (5) to the suction coupling (11) of the appliance
rotating the base until the locking buttons of the flexible suction pipe click in their seat
(6) indicating proper fastening. [Fig. B1].
•
Connect the handle (1) of the flexible pipe to the suction pipe (3).
•
Adjust the length of the telescopic pipe by pressing the adjustment button (3A) in the
direction of the arrow and removing or retracting the adjustable telescopic pipe (3B)
[fig. C1].
MI002394_M3503.indd 11
SYMBOLS
Automatic cable winding
Hard floors
ATTENTION
15. Automatic cable winding button
16. Dust collection system
16A. Upper cover
16B. Upper cover opening/locking button
16C. Safety interlock
16D. HEPA premotor filter
16E. Dust container
17. Coupling for horizontal parking position
18. Outlet filter
19. Discharge filter grid
20. Release/locking button of the outlet filter grid
21. Accessories
21A. Crevice tool
21B. Upholstery nozzle
21C. Dusting nozzle
21D. Parquet brush
21E. Animal care mini-turbo brush
ASSEMBLY
EN
11
18/01/2016 12:51:05