Idiomas disponibles
Idiomas disponibles
During operation with continuous unloading, do not remove the water tank.
Possible problems caused by the external water drain are not detected by
the full tank alarm.
An efficient supervision is necessary in order to prevent malfunctions, dam-
ages to the appliance and/or dangerous work conditions.
3.5 - BLACKOUT
In case of blackout, the appliance restarts to work in the previously selected conditions when power is
restored.
4 - MAINTENANCE AND CLEANING
Before performing any cleaning or maintenance
intervention on the appliance, disconnect the plug
from the power socket and wait for the fan to stop
completely.
4.1 - CLEANING
4.1.a - Cleaning the appliance
•
Use a dry cloth to clean the appliance.
•
If the appliance is very dirty, it is possible to use a cloth dampened with warm water (max 50°C) and
a mild detergent to clean its external parts. Dry with a dry cloth.
Make sure the appliance is completely dry before reconnecting the plug to
the power socket.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use petrol, solvents, polishing pastes or similar.
These products could break or deform the plastic surface.
Do not use oils, chemical substances or abrasive products to clean the ap-
pliance.
Neither wash nor immerse the appliance with/in water.
•
Use a vacuum cleaner to remove dust from the air inlet/outlet grids.
In case of an appliance malfunction, do not try to disassemble it but instead
refer to the retailer or to the technical assistance service.
EN - 20
