Idiomas disponibles
Idiomas disponibles
4.2 - ACTIVE CARBONS FILTER CLEANING
It is advised to clean the filter every two weeks of operation.
•
Switch the appliance off and disconnect the plug from the power socket.
•
Remove the grid (5).
•
Remove the filter (10) (Fig.10).
•
Clean the filter (10) using a vacuum cleaner or a soft-bristled brush to remove dust (figure 11).
The filter (10) cannot be washed.
DO NOT use the appliance if the filter (10) is damaged; provide for its replace-
ment.
•
Correctly reposition the filter (10) in its specific seat.
•
Suck possible fluff from the grid (5).
Do not use the appliance without the grid (5) and/or the filter (10).
4.3 - TANK CLEANING
•
If the drainage tank is dirty, wash it with cold or lukewarm water.
•
Switch the appliance off and disconnect the plug from the power socket.
•
Remove the tank (7).
•
Work as described in paragraph "3.4.a".
Do not use detergent, scouring pads, chemically treated dust cloths, gaso-
line, benzene, thinner or other solvents, as these can scratch and damage
the tank and cause water leakage.
5 - PRESERVATION OF THE APPLIANCE
If you do not intend to use the appliance for a particularly long period of time or if operations which could
produce a lot of dust must be performed, it is advised to store the appliance as follows:
• Switch the appliance off and disconnect the plug from the power socket.
• Empty any water remaining in the tank.
• Wrap the supply cord and position it in the water tank (after making sure that the tank is completely dry).
• Clean the filter.
• Store in a fresh and dry place away from humidity.
EN - 21
AQUARIA S1 10/12/14/16 P
