Idiomas disponibles
Idiomas disponibles
2.2 - WARNINGS
A failure to respect what follows may cause damages to the appliance.
a. Install the appliance on flat, stable and on floor level sur-
faces.
b. Only connect the appliance to outlets equipped with a
ground system.
c. Make sure that curtains or other objects do not obstruct the
air suction filters (Fig.5).
d. Make sure to keep a minimum distance of 20/30 cm be-
tween the appliance and the adjacent objects (Fig.1).
e. The appliance must always be activated paying attention that there are no obstacles
for air suction and output.
f. The appliance must not be used in laundry rooms.
g. Only install the appliance in dry rooms.
h. The appliance must not be started in the presence of dangerous materials, vapours or
liquids.
i. Clean the air filters at least once a week.
2.3 - INSTALLATION OF THE APPLIANCE
•
After removing the packaging, check that the appliance is in perfect condition; in case of doubts do not use it and
refer to professionally qualified personnel.
•
Install the appliance on a rigid and levelled floor while keeping the room ventilated.
•
Place the appliance in a suitable environment.
Make sure that curtains or other objects don-t obstruct the air flow (Fig. 5).
•
Leave at least 20cm of free space on both sides and behind the appliance and leave at least 30cm of free space
above it (Fig. 1).
•
Remove the tank (7) and uncoil the supply cord (9).
Correctly reposition the tank (7) in the appliance body.
•
•
Insert the plug in the power socket; the appliance emits a "beep" and the display shows the percentage of hu-
midity in the room.
2.4 - ELECTRICAL CONNECTION
The appliance is fitted with a power cable with plug.
Before connecting the appliance, make sure that:
•
The voltage and power frequency values match those specified on
the appliance plate data.
•
The power supply line is equipped with an efficient ground connection
and that it is correctly dimensioned for the maximum absorption of
the appliance.
•
The appliance's power network must be equipped with a suitable omnipolar disconnection device
compliant with national installation regulations.
•
The appliance is powered solely through a socket compatible with the
plug provided.
CAUTION
Any replacement of the power cable must be carried out solely by Olimpia
Splendid technical support or by similarly qualified personnel.
EN - 16
