Idiomas disponibles
Idiomas disponibles
CAUTION
Do not allow the vacuum cleaner to
remain in one spot for any length of time
when the brushroll is turning. Damage
to carpet may occur.
4. Once the vacuum is on, operate the
vacuum cleaner by tilting the wand back
towards you and with the nozzle flush
with the floor surface.
NOTE:
Brushroll does not rotate in
either mode when handle is in fully upright
position.
5. Once you have completed vacuuming,
switch to the "O" position and unplug
the power cord from the power outlet.
NOTE:
Select the right mode when using
this vacuum cleaner. It is not recommended
to use the "II" position when cleaning bare
floor as damage to the floor may occur.
BRUSHROLL STATUS INDICATOR
Light Color
Status
Green,
The brushroll is spinning and
Continuous
working as it should.
There is a jam in the
brushroll area. Turn off and
Red, Continuous
unplug the vacuum, and
remove any blockages in
the nozzle.
No Light
The brushroll is off.
OPERATION MODES
ABOVE FLOOR MODE
1. Place the vacuum cleaner in the upright
2. Press the wand release button and lift up
3. Choose the desired attachment and
4. Turn on the vacuum cleaner by pressing
5. Once you have completed vacuuming,
NOTE:
directly into the handle for above floor
cleaning.
Brushroll
Status
Indicator
- 12 -
locked position.
the wand for above floor cleaning.
Wand Release Button
insert it into the wand.
Wand
the switch to the "I" position.
switch to the "O" position and unplug
the power cord from the power outlet.
The attachment also can insert
Handle
3-1 Combination
Tool
3-1 Combination
Tool
