Hilti CD 4-A22 Manual De Instrucciones Original página 22

▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service.
3
Description
3.1 Overview 1
3.2 Items supplied
Dispenser, scaffold hook complete, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group.
3.3 Intended use
The CD 4-A22 cordless dispenser is designed for use with foil packs up to 600 ml and 300 ml or 310 ml
cartridges.
The product can be operated with a plastic or aluminum cartridge holder:
▶ For this product, use only the Hilti plastic cartridge holder set with included piston rod: For processing
cartridges.
▶ For this product, use only the Hilti aluminum cartridge holder set with included piston rod: For processing
foil packs.
▶ Use only Hilti Li-ion batteries of the B22 series with this product.
16 English
Printed: 29.07.2019 | Doc-Nr: PUB / 5466569 / 000 / 02
Connecting sleeve
@
Securing screws for scaffold hook
;
Scaffold hook
=
Speed control wheel
%
Grip
&
Battery charge-status and fault indicator
(
Battery release buttons (also used to activate
)
the charge status indicator)
Battery
+
LED to illuminate the working area
§
Switch
/
Piston-rod release button
:
Cartridge holder
∙
Short piston rod
$
Ergonomic grip
£
Securing screw for ergonomic grip
|
Allen wrench for the scaffold hook and grip
¡
Front panel
Q
Aluminum tube
W
Piston attachment for processing foil packs
E
Long piston rod
R
2221132
*2221132*