Function Parameters For - Sharp XE-A203 Manual De Instrucciones

5. Entry digit limit programming (Press
(1) Enter entry digit limit using numeric key.
The entry digit limit can be set up to 8.
Default setting is 8.
The entry digit limit is in effect for REG mode
operation but can be overridden in the MGR mode.
The entry digit limit is represented by the number of
allowable digits for the maximum entry or total
amount. When "0" is set, the operation of the
corresponding key is prohibited.
s
(2) Press the
In the case of programming for the
keys, the display shows "CH2 PROGRAMMING"
and "CR2 PROGRAMMING" respectively. Go to
step 2 to program the
In the case of programming for the
b
and keys, the display shows
"ENTER[TL/NS]KEY". Go to step 6.
6. Terminate programming
A
(1) Press the
programming.
Item:
A Footer print
B Amount tendered entry
C Entry digit limit

Function parameters for

*1:Item:
A Footer printing*
B Amount tendered entry*
54
C Entry digit limit
s
key to register the setting.
X
and
Y b
and keys.
r R
,
X
key to terminate the
A
To program 0 for all items
@
1
* ABC
To program for another key
A
to skip. / Press
c
Y
,
key
Selection:
No*
Yes
X
Non compulsory (for
c b
Inhibit (for and )*
Compulsory
s A
Selection:
Allow
Disallow*
Compulsory
Non-compulsory*
to terminate.)
7
s CH2 PROGRAMMING
ENTER[00]KEY
A
Print
Text
Print:
0
1
Y
and )* 0
0
1
0-8 (default:8)
Entry:
1
0
1
0
0-8 (default:8)
7
0.00
From left, ABC