NOTICE!
Do not charge the refrigerator with DC12Vand solar at the same time, W otherwise the refrigerator wouId be damaged!
• Battery ON/OFF: Long press the switch button of the battery to turn on/off. When the battery is off, press the switch button to
display the charging status
Note:
• When the battery is not fully charged with the adapter or solar, it can' t be turned off;
• When the power indicator is green, it means charging; when the power indicator is blue, it means discharging; when the power
indicator is off, it means the battery is fully charged.
• lf the refrigerator won' t be in use for a long time, fully charge the battery and turn it off.
• Battery power saving: lt is recommended to charge the refrigerator before your departure. Put food and beverages in the refrigerator
and cool them to a proper temperature, which will make the lithium battery last longer and save energy. The battery output can be
disconnected by unplugging the battery or turning off the battery to prevent self-discharge.
lnstructions for solar charging: When using solar panel to charge the battery, place the refrigerator in a cool place to avoid
•
overheating that would cause malfunction
of the refrigerator. The battery icon on the display will show the charging status when it is charging.
The charging input power should be higher than the working power of the refrigerator (about 40-45W), or press the power button to
make the refrigerator enter the stand by state, otherwise the battery will not be able to charge. lt is recommended to use a l00W solar
panel.
• lnstructions for in-vehicle use:
Engine start: select H, M or L mode (refer to Page 3 Battery Protection), and use car port power to operate the refrigerator.
Engine flameout: When using the car battery to charge, most cars will stop power supply after the engine is turned off, while sorne cars
will continue to supply power. At this time, the battery protection should be adjusted to H, otherwise the car battery may be exhausted,
resulting in insufficient power to start the car.
Cleaning and Storage
Cleaning:
• Unplug the device first to avoid electric shock.
• Use wet cloth to clean the device and dry it.
• Remove the cover and drain from the hale at the bottom of the device.
• Do not soak the device in water and do not wash it directly.
• Do not use abrasive cleaning agents as these can damage the device.
Storage:
lf the device will not be in use for a long time, please follow the steps:
• Turn off the power and remove the plug.
• Remove ali the items stored in the device.
• Remove the cover and drain from the hale, wipe off excess water with a soft rag.
• Leave the lid slightly open to prevent odors from forming.
• Put the device in a cool and dry place.
Defrosting:
Humidity can form frost in the interior of the cooling device or on the evaporator,
which will affect the cooling performance. Defrost the device regularly to avoid this.
• Switch off the device.
• Take out the contents of the device.
• Keep the lid open.
• Remove the cover and drain from the hale.
• Wipe off the defrosted water.
Never use hard or sharp tools to remove ice or to loosen objects which have a frozen in place.
(it will go out automatically after 3 seconds.)
Discharge time( ECO and L mode)
Refrigeration
Freezing
(Not included in the package)
About 4 hrs
About 2 hrs
Solar panel (SOLAR) charge connection:
Insert the solar charge cable into
the refrigerator's "SOLAR" terminal.
Max Solar Input Voltage: 50V
Max Solar Input Current: 10A