Idiomas disponibles
Idiomas disponibles
Changing the display item
Each time you press (DSPL/SA), the item
changes as follows:
Track number/
Elapsed playback time
Disc name*
Track name*
If there is no prerecorded title for a disc "NO
*
1
D.Name" will appear on the display.
If a track title is not prerecorded, "NO T.Name"
*
2
will be displayed.
After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tips
• If the name of the MD is too long, you can scroll
it across the display window by pressing (SHIFT),
then press (2) (T) while the disc name or track
name is displayed.
• The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 33.)
Automatically scrolling a disc name
— Auto Scroll
If the disc name or track name on an MD
exceeds 10 characters and the Auto Scroll
function is on, the following automatically
scrolls on the display:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
• The disc or track name appears depending on
the setting when you press (SOURCE) to select
an MD.
If you press (DSPL/SA) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off.
10
V
V
1
V
2
V
Clock
1
During playback, press (SHIFT).
2
Press (3) (SET UP) repeatedly until
"A.Scrl" appears.
3
Press (5) (t) to select "A.Scrl on."
4
Press (SHIFT).
To cancel Auto Scroll, select "A.Scrl off" in
step 3 above.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down momentarily.
To locate succeeding
tracks
To locate preceding
tracks
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold. Release
when you have found the desired point.
To search forward
To search backward
Note
If "
" or "
means you have reached the beginning or the end
of the disc and you cannot go any further.
" appears in the display, it
