Idiomas disponibles
Idiomas disponibles
WW22K6800AW-A2_03645A-02(v1)_EN.indd 23
To connect the water hose to the faucet:
1. Connect one end of each water hose to
the Hot or Cold tap.
2. Turn the fittings manually to the end,
and then tighten them just by an
additional two-thirds of a turn with
a plier. Do not overtighten them to
prevent damage to the fittings.
3. When done, pull up or down the water
hoses to check if they are properly
connected.
4. Put the other ends of the hoses into
a bucket and open the taps for 10-15
seconds to remove impurities. When
done, close the taps.
English 23
2017/6/21 9:06:52
