Silca Easy Scan Plus Manual De Uso página 8

Easy Scan Plus
IDENTIFICATION / COPY OF A FIXED CODE REMOTE CONTROL
Take the remote control to be read up to the reading area
(see fi g.1-C) and press any bu on on the remote control.
If there are problems with reading, move the remote
control a few cen metres away and repeat the procedure.
The remote control opera ng frequency is shown.
Request to press the same bu on again.
TLC : REMOTE CONTROL
If the remote control in question can be copied the
compatible Silca remote control (model and version )
is indicated.
(The copying procedure is described in the instructions
provided with the Silca remote control indicated by
Easy Scan Plus).
Press "ENTER" for the "Check Copy" func on.
When the copy has been made, take the Silca remote
control up to the reading area (to make contact see fi gure
1) and press and release the same bu on as the one on the
copied remote control.
Keep the remote control near the reading area un l Easy
Scan Plus has fi nished the checking process.
Successful copy:
Unsuccessful copy
In this case repeat the copying procedure observing the instruc ons provided with the Silca remote control
indicated by Easy Scan Plus. If the remote control copy is not successful contact the A er-Sales Service.
8 Copyright Silca S.p.A 2016
Identifi cation
Press any key
on original Remote
(ESC) main menu
Identifi cation
press
same key
Waiting TLC
(ESC) main menu
Copy on
Silca Air X SW yy.yy
Fixed
(ESC) Back (ENT) Next
Copy check
Press the same key
on copied Remote
(ESC) main menu
Copy check
SUCCESSFUL copy
Fixed
(ENT) to continue
Copy check
WRONG copy
not matching code
Fixed
(ENT) to continue
English
XXX Mhz
433 MHz
433 MHz